How to Install a New Faucet in Your Kitchen or Bathroom


Installing a brand-new tap in your kitchen area or bathroom can be a challenging task, however with the right devices and a bit of knowledge, it can be a straightforward procedure. Whether you’re changing an old tap or installing a new one, this guide will certainly stroll you through the steps to get the job done right.

Gather Your Tools

Prior to you start, make sure you have all the essential tools and products. You’ll require:

– A new faucet
– Flexible wrench
– Basin wrench
– Plumbing’s putty or silicone caulk
– Teflon tape
– Container or towels
– Screwdriver
– Pliers

Shut off the Water

Prior to you start servicing your tap, you require to switch off the water. Search for the shut-off valves under the sink as well as turn them clockwise to shut off the water. If you can’t discover the valves, you might need to turn off the major water system to your residence.

Remove the Old Tap

When the water is shut off, you can get rid of the old faucet. Beginning by detaching the supply lines from the faucet utilizing an adjustable wrench. Then, make use of a basin wrench to loosen up the nuts that hold the faucet in place. Once the nuts hang, you must have the ability to raise the old faucet off the sink.

Prepare the Sink

Prior to you set up the new faucet, you require to prepare the sink. Tidy the area where the old faucet was affixed and eliminate any type of old putty or caulk. After that, position a percentage of plumber’s putty or silicone caulk around the base of the brand-new faucet.

Mount the New Faucet

With the sink prepared, you can now set up the new tap. Location the brand-new faucet right into the holes in the sink as well as tighten the installing nuts with a container wrench. Beware not to over-tighten the nuts, as this can damage the sink or the faucet.

Attach the Supply Lines

Once the brand-new faucet is firmly in place, you can attach the supply lines. Use Teflon tape to wrap the strings on the supply lines and then link them to the faucet making use of a flexible wrench. Be sure to tighten the connections safely, but do not over-tighten them.

Evaluate the Tap

With the supply lines connected, you can turn the water back on as well as evaluate the faucet. Look for any kind of leakages around the base of the tap or the supply lines. If you do notice any leaks, tighten up the links a little bit more until the leakages stop.


Setting up a new tap in your kitchen or bathroom can appear like an overwhelming task, yet with the right tools as well as a little of knowledge, it can be an uncomplicated procedure. By complying with these steps, you can set up a brand-new faucet and also enjoy the advantages of a fresh, upgraded search in your residence. Remember to switch off the supply of water before you begin, and take your time to ensure that every little thing is mounted properly. With a bit of patience, you’ll have a lovely new tap in a snap.

When you buy something through our affiliate links, we earn a commission without you having to pay extra.