DIY Installation Guide for a New Toilet

Do It Yourself Setup Guide for a New Bathroom

Mounting a brand-new commode might feel like a challenging task, but with the right devices and also a little know-how, it can be a straightforward DIY project. Whether you’re replacing an old bathroom or setting up a brand-new one, this detailed overview will certainly aid you browse with the process with ease. So, roll up your sleeves as well as allow’s start!

Collect the Needed Devices and Materials

Prior to you begin the installment procedure, it is necessary to gather all the necessary tools and materials. Here’s a list of what you’ll need:

1. New bathroom
2. Wax ring
3. Adjustable wrench
4. Screwdriver
5. Level
6. Hacksaw
7. Bucket
8. Towels
9. Plumber’s tape
10. Silicone caulk

Remove the Old Commode

The initial step in installing a brand-new toilet is to get rid of the old one. Adhere to these actions to guarantee a smooth removal procedure:

1. Shut down the water: Locate the shut-off valve near the base of the commode and also turn it clockwise to shut down the water.

2. Drain the tank: Flush the commode to drain the water from the storage tank. Utilize a sponge or towel to absorb any type of staying water in the container as well as bowl.

3. Separate the water line: Make use of an adjustable wrench to loosen the nut connecting the water line to the bottom of the tank. Once loose, remove the supply line from the storage tank.

4. Eliminate the tank: Loosen the bolts protecting the storage tank to the bowl utilizing a screwdriver or wrench. Very carefully raise the tank off the bowl and set it apart.

5. Get rid of the bowl: Remove the caps covering the bolts at the base of the toilet and also unscrew the nuts utilizing a flexible wrench. Raise the bowl directly and also place it on a towel or in a pail to catch any type of staying water.

Prepare the Area for Installation

Now that you’ve efficiently gotten rid of the old toilet, it’s time to prepare the location for the setup of the brand-new one. Adhere to these actions to guarantee a clean as well as level surface:

1. Tidy the flange: Evaluate the flange, which is the pipeline installation on the flooring where the bathroom connects. Eliminate any kind of particles or old wax from the flange using a putty knife or scraper.

2. Inspect the flange elevation: Make certain that the flange is level with or a little above the completed flooring. If it’s too reduced, you might require to use a flange extender to elevate it to the correct elevation.

3. Install a brand-new wax ring: Place a brand-new wax ring on the flange, ensuring it is focused and correctly aligned. Push down firmly to produce a water tight seal.

Set Up the New Toilet

With the location prepared, it’s time to install the new toilet. Adhere to these actions to ensure a protected and secure installation:

1. Placement the bowl: Meticulously reduced the bowl onto the wax ring, lining up the screw holes on the base of the commode with the holes on the flange. Apply down pressure to compress the wax ring and also create a limited seal.

2. Secure the bowl: Location washing machines and nuts onto the screws and tighten them using an adjustable wrench. Take care not to overtighten, as this can split the commode bowl.

3. Connect the storage tank: Setting the storage tank onto the bowl, aligning the screw openings. Place screws via the holes and protect them with washers and also nuts. Again, be cautious not to overtighten.

4. Link the water system line: Attach the supply of water line to the bottom of the container as well as tighten the nut using an adjustable wrench. Guarantee a tight fit, yet prevent overtightening to stop damages.

5. Switch on the supply of water: Gradually turn the shut-off valve counterclockwise to bring back the supply of water. Look for any type of leaks around the links and also tighten up as needed.

Finishing Touches

Now that the brand-new toilet is set up, it’s time to add the finishing touches. Adhere to these steps to complete the installment:

1. Level the toilet: Place a level throughout the bowl and also adjust the toilet’s position as required to ensure it is degree. Shim the base if required to accomplish a steady as well as well balanced commode.

2. Caulk around the base: Apply a thin grain of silicone caulk around the base of the bathroom to develop a watertight seal and also stop any kind of dampness from seeping beneath.

3. Examine the flush: Flush the toilet numerous times to guarantee correct functionality. Check for any kind of leaks or uncommon audios and make adjustments as required.

4. Clean up: Get rid of any kind of old products and also clean up the workspace. Wipe down the bathroom and bordering area with a moderate cleaner to remove any dust or debris.


Installing a new commode doesn’t have to be a challenging or pricey task. By following this do it yourself installation guide, you can with confidence change or mount a toilet in your home. Remember to gather all the needed tools and materials, eliminate the old commode carefully, prepare the location for installation, and also mount the brand-new toilet safely. With a little patience as well as interest to information, you’ll have a completely functioning commode in a snap. Pleased DIY-ing!

When you buy something through our affiliate links, we earn a commission without you having to pay extra.