DIY Home Security: Installing a Deadbolt Lock


Residence safety is a leading priority for house owners. Installing a deadbolt lock is a straightforward and efficient method to enhance the protection of your house. Deadbolt locks supply an additional layer of protection versus thiefs as well as intruders. In this blog post, we will assist you through the process of mounting a deadbolt secure your residence.

Tools and Materials

Prior to you begin the installation procedure, you will certainly need the following tools and also products:

– A deadbolt lock package
– A drill
– A hole saw
– A screwdriver
– A hammer
– A sculpt
– A determining tape
– A pencil

Step-by-Step Overview

Comply with these actions to set up a deadbolt secure your home:

Action 1: Pick the Right Place

The primary step is to select the right place for your deadbolt lock. The suitable area is about 6 inches over the doorknob. Step the distance in between the center of the doorknob and also the facility of the deadbolt lock to ensure that the lock is fixated the door.

Step 2: Mark the Door

Make use of a pencil to note the location of the deadbolt lock on the door. Make use of a measuring tape to ensure that the mark goes to the appropriate elevation as well as fixated the door.

Action 3: Drill the Hole

Make use of a drill as well as an opening saw to drill a hole in the door where you marked it. The hole should coincide size as the lock cyndrical tube.

Tip 4: Install the Lock Cyndrical Tube

Insert the lock cylinder into the hole you simply drilled. Make certain that the lock is encountering the right direction. Secure the lock cylinder in place with screws.

Step 5: Mount the Strike Plate

The strike plate is the steel plate that the deadbolt lock slides into when the door is secured. Utilize a sculpt and a hammer to produce a recess for the strike plate on the door jamb. Safeguard the strike plate in position with screws.

Action 6: Mount the Deadbolt Lock

Insert the deadbolt lock right into the opening in the door. Ensure that the lock is dealing with the ideal direction. Protect the lock in location with screws.

Action 7: Check the Lock

Test the lock to see to it that it is functioning correctly. Turn the trick to lock and unlock the deadbolt. Make certain that the deadbolt slides efficiently right into the strike plate.

Tips and Tricks

Here are some tips and techniques to aid you mount a deadbolt lock:

– Use a sharp drill bit and also a hole attended make a clean hole in the door.
– Use a carve as well as a hammer to develop a recess for the strike plate. Make certain that the recess is deep sufficient for the strike plate to rest flush with the door jamb.
– Make use of a degree to make sure that the deadbolt lock is straight.
– Use a lubricant, such as WD-40, to lube the lock cylinder and also the deadbolt.


Setting up a deadbolt lock is a simple as well as efficient way to improve the safety and security of your home. With the right tools and also materials, you can mount a deadbolt secure simply a few hrs. Adhere to the steps described in this article to mount a deadbolt lock in your home. Remember to evaluate the lock to ensure that it is working effectively.

When you buy something through our affiliate links, we earn a commission without you having to pay extra.